Close the tool around the heater core pipe. The Advance Auto Parts core charge presented to you online today with your item is representative of the most common core charge. Please any help would be great Thanks Lee The big black box under the dash is generally held together with clips around the periometer where the two halves come together. Connect the electrical harnesses and the ground connections. Tool snaps around the hose and simultaneously depresses the locking tabs to disengage the fitting.
Firmly grasp the heater hose. Remove the instrument panel carrier. A complete set of disconnect tools that can be stored in a handy blow-molded case. Install the surge tank outlet hose to the heater core. Check out the diagrams Below.
It is for information purposes only. Tighten: Tighten The Bolts To 4 N. Warranties All products sold on AdvanceAutoParts. The handles are angled to access tight spots. Close the tool around the heater core pipe. Lisle 39960 2-Pc Transmission Oil C. Tools Required J 43181 Quick Connect Connector Removal Tool Removal Procedure Drain the engine coolant.
Minnesota state franchise registration number F-2705. Under the Magnuson - Moss Warranty Act, 15U. Then press tool into the connector to release. View Full-Screen Install the inlet heater hose to the heater core. Works on fuel lines and other quick disconnect couplings on domestic and import vehicles. Made of durable plastic that resists fuels and solvents. This information is not intended as an offer to sell, or the solicitation of an offer to buy, a franchise.
Firmly grasp the heater hose. With the large number of do-it-yourselfers who prefer to install their own filters, this misleading claim should be corrected. Then reconnect the negative battery cable. If the consumer asks for the statement in writing, he will not receive it. Disonnect the hoses at the firewall and you will see a nut very close to them. Using the J 43181 disconnect the inlet heater hose from the heater core.
For all other products, please contact. Remove the instrument panel carrier. Simply push the line toward the connector, then engage tool and pull line from conector. Firmly pull the tool into the quick connect end of the heater hose. That claim is simply not true. The access is very limited and the connectors have four tangs to depress at the same time. Slide J-43181 disconnect tool over the heater line.
Using the J 43181 disconnect the surge tank outlet hose from the heater core. Firmly pull the tool into the quick connect end of the heater hose. In addition, a consumer can bring suit under the Magnuson - Moss Warranty Act. The access is very limited and the connectors have four tangs to depress at the same time. All disconnect tools are also available individually.
Lisle 34750 Low Profile Fuel Line Disconnect Set. Engine and Transmission Warranty Claims If you are experiencing problems with an engine or transmission you purchased from Advance Auto Parts, please call 888 286-6772, Monday through Friday, 8:00am - 5:30pm Eastern Time. This wait period--and disconnecting the battery--is the only way to make certain the airbags will not accidentally deploy. In many states, to promote recycling, you are charged a deposit when you purchase a can of soda and you receive your deposit back when you return the empty can. Terms and length vary by product.
All disconnects available individually skin-packed. Cheers, Ken Need some help! Install the J 43181 to the heater core pipe. Slide J-43181 disconnect tool over the heater line. Close the tool around the heater core pipe. Tighten: Tighten The Nuts To 9 N. This retains the heater core and must be removed.
You will need to discharge and recharge the air conditioner as well, here is a link for that Here are the core replacement instructions. Pull the heater hose forward in order to disengage the surge tank outlet hose from the heater core. This, of course, tends to cast doubt on the quality of the replacement filter. Pull the heater hose forward in order to disengage the inlet hose from the heater core. Tip is specially stepped to fit connector. Pull the heater hose forward in order to disengage the inlet hose from the heater core.